Skip to content
Industrial PartitioningCompanyGet a quote
Menu

Security Cages for Warehouses

A security cage is mesh partitioning closed in on every side, usually with a mesh roof, so a corner of the building becomes a locked room you can still see into.

Fitted cages are built to the space, not bought in a box, so they are priced once the installer has measured up.

Get a quote

Built from
Mesh sides, often a mesh roof
Access
Hinged or sliding lockable door
Price
Set on survey

What people lock away

  • High-value stock such as electronics
  • Tools and spares in a maintenance area
  • Controlled goods that need a locked store
  • Returns awaiting inspection

Not the right choice for: Anything needing fire separation: mesh gives none; Storing hazardous substances without checking the specific rules that apply to them.

Using the building walls

A cage often sits in a corner or against a wall, so you may need to build just two or three sides. That cuts the run length, but the installer has to check the wall can take the fixings and that nobody can climb over the top. A mesh roof deals with the second point.

Our run planner works out the run length and panel count for the sides you need.

Roofs, sprinklers and lights

A roof keeps people from climbing in, but it also sits between your sprinklers, lights and the stock. Tell the installer where the sprinkler heads are and speak to your sprinkler contractor before the roof goes on, so the design still works.

Lighting needs the same thought. A cage under a light fitting may need its own light inside if the roof casts shadows.

Doors and locks

Pick the door to match what goes in and out: a single hinged door for people with small items, a sliding door for pallets. A sliding door must have a device to stop it coming off its track under regulation 18 of the Workplace Regulations.

Decide on the lock early. Keys, a padlock hasp, or a lock that matches the rest of your site all change the door specification.

A cage can change your escape routes

A new cage in the wrong corner can block a short route to an exit. Escape routes must stay clear, and a significant change to the layout is a reason to review the fire risk assessment (Fire Safety Order, article 9).

From measurement to keys

  1. Measure

    Sides, height, the building walls you can use, and anything overhead.

  2. Specify

    Panel layout, roof, door type and lock agreed.

  3. Build

    Posts anchored, panels and roof fitted, door hung.

  4. Hand over

    Keys issued and the fire risk assessment updated if the layout changed.

Security cage questions

Does a security cage need a roof?

If anyone could climb in over the sides, yes. A mesh roof closes the cage while keeping it visible.

Will a cage affect my sprinklers?

A mesh roof sits between the sprinkler heads and the stock, so check the design with your sprinkler contractor before it is fitted.

Can a cage be moved when we leave the unit?

Bolted mesh systems can usually be taken down and reused. You will need to make good the anchor holes.

How much does a security cage cost?

It depends on the sides, height, roof and door. We publish no rate because no installed price we can stand behind has been published. Installers price it on survey.

Is a fitted cage better than a boxed one?

A fitted cage is built to your space and can use the building walls. A boxed cage is a set size. For awkward corners or large areas, fitted usually suits better.

Get prices for a security cage

We look for an installer who fits this kind of system near your site and tell you who they are before any of your details go to them. There is no charge to you.

Step 1 of 3
Where is the building?
Get a quote