Skip to content
Industrial PartitioningCompanyGet a quote
Menu

Machine Guard Fencing

Mesh fencing round a robot cell can look just like a warehouse partition. It is not the same thing. Once a fence is there to keep people away from dangerous parts of a machine, it is a guard, and the law on work equipment sets the standard.

Guard fencing is designed around the machine and its risk assessment, so it is priced after a survey.

Get a quote

Law
PUWER 1998, regulation 11
Usual standard
BS EN ISO 14120
Price
Set on survey

Where guard fencing is used

  • Robot cells and automated lines
  • Palletisers and wrappers
  • Conveyors with exposed moving parts
  • Test areas where parts can be thrown

Not the right choice for: Simply dividing space, where an ordinary partition will do.

What regulation 11 asks of you

Regulation 11 of PUWER, the 1998 rules on providing and using work equipment, requires employers to take effective measures to stop anyone reaching a dangerous part of machinery, or to stop the movement before they get there. It sets an order to work through.

  • First: fixed guards enclosing every dangerous part, where practicable.
  • Then: other guards or protection devices, where the first is not practicable.
  • Then: jigs, holders, push-sticks and similar protection appliances.
  • And: information, instruction, training and supervision.

Perimeter fencing round a cell is a guard, so it sits near the top of that list. HSE's L22 Approved Code of Practice gives the detail.

The standards a fence is built to

BS EN ISO 14120 sets general requirements for the design and construction of fixed and movable guards. A fixed guard is one that can only be opened or removed with a tool, which is why fence panels are bolted rather than clipped.

BS EN ISO 13857 deals with safety distances, linking the height of a fence and the size of its mesh openings to how far it must stand from the hazard. We do not reproduce its tables: the guard designer applies them to your machine.

Access doors need interlocks

A door into a cell is a movable guard. It is normally interlocked with the machine so the dangerous movement stops before anyone can reach it. Our post on BS EN ISO 14120 explains the difference.

What the fencing installer will need

Guard fencing follows the machine risk assessment, so have these ready.

  • The risk assessment for the machine or cell.
  • Layout drawings with the robot reach or moving envelope.
  • Access needs: doors for maintenance and points where material goes in and out.
  • The control system the interlocks will connect to.

If you are buying a new machine, its supplier has duties too, under the Supply of Machinery (Safety) Regulations 2008. Ask what guarding comes with it before you order fencing separately.

How guard fencing is delivered

  1. Risk assessment

    Hazards, reach and access points agreed for the machine.

  2. Guard design

    Fence height, mesh and distances set to the standards, with doors and interlocks.

  3. Install

    Posts fixed, panels bolted, doors hung and interlocks wired by the controls engineer.

  4. Check

    Interlocks tested and the guarding recorded before the machine runs.

Machine guarding questions

Is machine guard fencing the same as a partition?

No. A partition divides space. A fence that stops people reaching dangerous parts is a guard under PUWER regulation 11 and is designed to the machinery standards.

What is the order of measures in PUWER regulation 11?

Fixed enclosing guards where practicable, then other guards or protection devices, then protection appliances such as jigs and push-sticks, with information, instruction, training and supervision as well.

Why are guard panels bolted?

A fixed guard should only come off with a tool, so nobody can lift a panel out by hand.

How high should guard fencing be?

BS EN ISO 13857 links height, mesh opening and distance from the hazard. The right height depends on your machine, so the guard designer works it out.

How much does machine guard fencing cost?

It depends on the cell, the doors and the interlocks. It is priced on survey.

Get prices for guard fencing

We look for an installer who fits this kind of system near your site and tell you who they are before any of your details go to them. There is no charge to you.

Step 1 of 3
Where is the building?
Get a quote