Skip to content
Industrial PartitioningCompanyGet a quote
Menu

What does BS EN ISO 14120 cover for machine guards?

An empty industrial building with a steel roof frame

In brief

BS EN ISO 14120 is the standard for the general design and construction of machine guards, both fixed and movable. It does not tell you which guard to fit. It sets out what a guard must be like once you have decided you need one. It works alongside ISO 13857 for safety distances.

Contents of this post
  1. What the standard is for
  2. Fixed guards and movable guards
  3. What the standard looks at in a guard
  4. How it links to ISO 13857
  5. Where the law comes in
  6. Using it when you buy guarding

You may have seen BS EN ISO 14120 on a guarding quote or a fence supplier’s paperwork and wondered whether it is something you have to comply with. It is a standard, not a law.

This post covers what the standard is for, the two kinds of guard it deals with, and how it sits with the law and the other standards you will hear about.

What the standard is for

BS EN ISO 14120 sets general requirements for the design and construction of guards that protect people from the mechanical hazards of machinery. BSI publishes it as “Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards.”

The key word is general. It does not tell you that your press needs a fence rather than a light curtain. That decision comes from the machine’s risk assessment and from the order of measures in regulation 11 of PUWER. ISO 14120 takes over once you have decided a guard is the answer and tells you what a good one looks like.

Fixed guards and movable guards

The standard splits guards into two families, and the difference matters for how a fence is built.

Fixed guard Movable guard
How it is held Fixed so it can only be opened or removed with a tool, or by destroying the fixing Can be opened without tools
Typical example Bolted fence panels round a cell An access door into the cell
Usually paired with Nothing else, if access is rarely needed An interlock that stops the machine

That first row explains why guard fence panels are bolted rather than clipped. If someone can lift a panel out by hand, it is not acting as a fixed guard.

Movable guards are used where people need to get in often, for loading or setting. Because they open without tools, they are normally interlocked so the dangerous movement stops before anyone can reach it.

What the standard looks at in a guard

Beyond the two families, the standard covers the qualities a guard needs to do its job over time. In broad terms, a guard should:

  • Keep people out of the danger zone, taking account of reach over, under, round and through it.
  • Be strong enough for the forces it will meet, including anything the machine might throw.
  • Stay put, with fixings that do not loosen or go missing.
  • Not create new hazards, such as sharp edges or trapping points of its own.
  • Allow the work to happen, because a guard that stops production tends to get removed.

That last point matters: a guard that makes a routine job awkward is more likely to be removed or worked around.

ISO 14120 relies on another standard for distances. BS EN ISO 13857 sets safety distances that stop arms and legs reaching hazard zones. It links the height of a barrier and the size of any opening, such as a mesh aperture, to how far the barrier must sit from the hazard.

In other words, ISO 14120 tells you a mesh fence must keep people from reaching in, and ISO 13857 tells you how tall and how far away it must be for a given mesh. We do not reproduce its tables here; the guarding designer applies them to your machine.

Where the law comes in

The legal duty in Great Britain comes from regulation 11 of PUWER (1998). It requires effective measures to prevent access to dangerous parts of machinery, starting with fixed enclosing guards where practicable.

The law does not name ISO 14120. But HSE’s Approved Code of Practice, L22, explains how to meet PUWER, and designing guards to the recognised standards is the usual way to show they are effective. If a guard ever has to be defended after an incident, being able to point to the standard it was built to helps.

Using it when you buy guarding

You do not need a copy of the standard to buy guarding well. You do need to ask the right questions:

  1. Which standards is the fence designed to, and does that include ISO 13857 distances for my machine?
  2. Are the panels fixed so they need a tool to remove?
  3. Which access points are movable guards, and how are they interlocked?
  4. Has the design been checked against the machine risk assessment?

A good guarding installer will answer all four without hesitation.

If you are planning a robot cell or a guarded line and want an installer to quote, send us the details below.

Rules and guidance we drew on

Ask for a partition quote

We look for an installer who fits this kind of system near your site and tell you who they are before any of your details go to them. There is no charge to you.

Step 1 of 3
Where is the building?
Get a quote